1. Home
  2. /
  3. Houses
  4. /
  5. Brighton House, Australia by FIGR. Architecture & Design

Brighton House, Australia by FIGR. Architecture & Design

Project name:
Brighton House
Architecture firm:
FIGR. Architecture & Design
Location:
Brighton, Victoria 3186, Australia
Photography:
Tom Blachford
Principal architect:
Adi Atic, Michael Artemenko
Design team:
Collaborators:
Michel Group Building Surveyors (Building Surveyor), Ruth Welsby (Styling)
Interior design:
Built area:
225 m²
Site area:
Design year:
Completion year:
2021
Civil engineer:
Structural engineer:
Meyer Consulting Engineers
Environmental & MEP:
Landscape:
Mud Office
Lighting:
Lights & Tracks
Supervision:
Visualization:
Tools used:
Construction:
Shape Building
Material:
Roofing: Colorbond Roofing. Colour: Whitehaven. External Walls: Weatherboard, Silvertop Ash Ship Lap Cladding with Cutek Finish, Custom Operable Screening. Internal Walls: CSR Plasterboard, Blackbutt Ash Ship Lap Cladding Treated in Osmo Polyx-Oil. Flooring: Blackbutt Flooring. Windows: KDHW in Cutek
Budget:
Undisclosed
Client:
Private
Status:
Built
Typology:
Residential › House, Additions & Alterations

FIGR. Architecture & Design: Like many dwellings from this period, the home has been a building site more than once during the course of its existence.

In this case, the clients have owned this Brighton property going back to the 1970s. And as their family grew so did their needs and eventually they commissioned an extension in the 1990s which was designed by architect John Cuthbert. What began as a ‘small update’, this project is yet another re-build iteration based on an emerging set of life circumstances centred around a retired lifestyle, periodic family gatherings, and entertaining grandchildren.

The project brief at one point appeared to challenge the physical limitations of the existing home, and whilst the structure was not a registered heritage place, all efforts were made to consider how an alterations and additions project can maintain and preserve as much of the character of the existing house and landscape as possible. In the end, the clients, being avid architecture enthusiasts, were onboard and an all new design was abandoned in favour for a sympathetic set of architectural interventions, rigorously stitched in and around the existing building.

By removing dead-ends in the plan, the extension looks to replace cellular rooms of the existing home with a more open plan zonal arrangement, capable of expanding and contracting in response to the changing needs of the occupant.

The massing of the additions is underpinned by a minimal approach with regards to materiality and form. Undulating roof forms are a direct response to the local fine grain residential context of the site - the raked underside of which displace generous ceiling heights above the main living areas.

Australian sourced hardwood clads the punctured facade openings, ceilings, soffits and decking. Where timber is installed internally, it is coated with Low VOC hardwax oils. Windows where replaced were upgraded with high performance double glazing.

Key to realising this project was this notion of unification between the existing structure and the proposed design. Between period and contemporary. Existing fireplaces were refurbished, retained and formed an integral part of the design approach. Architraves, skirtings, picture rails and the like were all not only painstakingly restored, but also informed contemporary re-interpretations in the new portions of the home.

The undeniable character of old buildings like this, provide an indelible foundation on which architecture can avoid whimsy and needless extravagance.


By Naser Nader Ibrahim

Share on: